View AMEOR30C-4864AZ_8503404.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 1 of 14 north america only features: models single output model max output power (w) * output voltage range (v) output current (a) input voltage (vac/hz) input voltage (vdc) efficiency (%) ame o r 3 0 - 50 7 0az 3 5 3 6 - 5 0 0. 7 90 - 277/47 - 440 13 0 - 390 86 ame o r30 - 4864az 30.72 36 - 48 0.64 90 - 277/47 - 440 13 0 - 390 86 ame o r3 0 - 36100az 36 24 - 36 1 90 - 277/47 - 440 13 0 - 390 85 ame o r 3 0 - 2414 0az 33.6 12 - 24 1.4 90 - 277 / 47 - 440 13 0 - 390 84 ame o r30 - 12250az 30 5 - 12 2. 5 90 - 277/47 - 440 13 0 - 390 83 c version supports fully integrated analog resistive, pwm, & 0 - 10vdc dimming feature ameor30 c - 5070az 35 36 - 50 0.7 90 - 277/47 - 440 13 0 - 390 86 ameor30 c - 4864az 30.72 36 - 48 0.64 90 - 277/47 - 440 13 0 - 390 86 ameor30 c - 36100az 36 24 - 36 1 90 - 277/47 - 440 13 0 - 390 85 ameor30 c - 24140az 33.6 12 - 24 1.4 90 - 277/47 - 440 13 0 - 390 84 ameor30 c - 12250az 30 5 - 12 2.5 90 - 277/47 - 440 13 0 - 390 83 * exceeding the maximum output power will permanently damage the converter all models can be ordered with optional north american colour input wires ( black (l) , white (n) , green (gnd)) . a dd C na to part number when ordering. note : aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25c, humidity<75%, nominal input volta ge (115/230/277vac) and at rated output load unless otherwise specified. see http://www.aimtec.com/terms - sale ameor30 - azs ac/dc led drivers have electrical safeguards designed within to protect it from conv entional electrical abnormalities with the levels listed in the safety table. applications for use within rural agricultural, heavy industrial, and other areas or regions which are prone to dirty electrical conditions which would subject any of the abov e models to excessive voltages surges or spikes, may damage or cause early life failure of product. in this case consideration should be made by the end user to ensure that adequate line o r mains surge suppression is installed in front of aimtec device to ensure the longevity of the products. failure to identify excessive line surges violations prior to installation may damage sensitive equipment permanently. i nput specifications parameters conditions typical maximum units inrush current <2ms 115vac 25 a 230vac 40 leakage current 115vac 0. 3 ma 230vac 0.5 ac current 115vac 0. 33 a 230vac 0. 16 power factor 115vac 0.99 230vac 0.97 external fuse 250v/1a start up time 450 ms surge voltage 2sec 440 v ? ac - dc constant current led driver ? over temperature protection ? input range 90 - 277 vac/47 - 440hz ? open frame ? high efficiency up to 86 % ? power factor correction ? operating temperature - 40 to 80 c ? dimmable via analog / 0 - 10vdc / pwm (c version se e table) ? scp, over current protection ? 5 years limited warranty click on series name for product info on aimtec.com
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 2 of 14 north america only output specifications parame ters conditions typical maximum units current accuracy 3 % line regulation ll - hl 1 % load regulation 0 - 100% load 3 % ripple & noise * 20mhz bandwidth 75 mv p - p hold - up time 50 m s current adjustment range 100 - 0 % minimum load voltage se e the models table * tested with 0.1f (m/c) or (c/c) and 47f (e/c) parallel capacitors at the end. isolation specifications parameters conditions typical rated units tested i/o voltage 3sec 3000 v ac isolation resistance >1000 m general speci fications parameters conditions typical maximum units switching frequency 130 khz over current protection 95 - 110% of iout over voltage protection 110% of vout short circuit protection continuous short circuit restart auto recovery over temper ature protection >105c operating temperature with derating over 60 c - 40 to + 80 o c maximum case temperature 100 o c storage temperature - 40 to +95 o c t emp era ture coefficient 0.02 % / o c cooling free air convection humidity 95 % rh wires ul 1015 18awg * 20cm weight 220 g dimensions (l x h x w) 5.8 3 x 1.97 x 1. 3 inches 14 8 x 50 x 33 mm mtbf >400,000 hrs (mil - hdbk - 217f at +25c) environment approval test parameters conditions shock wave form half sine wave acceleration amplitude 5gn bump duration 30 ms converter operation before and after test, body mounted (on chassis) number of bumps 18 (3 in each direction for every axis) vibration test mode sweep sine, 10 - 100hz, speed 0.05hz/s displacement 1 mm acceleration 3g, 3 loops 30min one cycle, 3h total, every axis tested converter operation before and after test, body mounted (on chassis)
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 3 of 14 north america only safety specifications parameters agency approvals culus, ce standards ul8750, ul60950 - 1, en55022, class b , information te chnology equipment en55022 class b harmonic current emissions iec/en 61000 - 3 - 2, class c voltage fluctuations and flicker iec/en 61000 - 3 - 3, (en60555 - 3) electrostatic discharge immunity iec 61000 - 4 - 2 level 3 rf, electromagnetic field immunity iec 610 00 - 4 - 3 level 2 electrical fast transient / burst immunity iec 61000 - 4 - 4 level 2 surge immunity iec 61000 - 4 - 5 level 3 rf, conducted disturbance immunity iec 61000 - 4 - 6 level 2 power frequency magnetic field immunity iec 61000 - 4 - 8 level 1 voltage di ps , short interruptions immunity iec 61000 - 4 - 11 dimensions note: to adjust the output current connect a 20k ohm pot between blue and white wire 148 . 00 ( 5 . 83 ) top view side view 28 . 00 ( 1 . 10 ) 50 . 00 ( 1 . 97 ) 5 . 00 ( 0 . 20 ) 4 . 50 ( 0 . 18 ) 4 . 50 ( 0 . 18 ) 4 mounting holes - m 3 139 . 00 ( 5 . 47 ) 41 . 00 ( 1 . 61 ) 200 . 00 ( 8 . 00 ) 200 . 00 ( 8 . 00 ) input / output wires are 18 awg 20 cm
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 4 of 14 north america only application circuit amepr30-az n 1 st led +vout 1 1 -vout red black ac blue l brown green blue white pot model number maximum pot value (k) amepr30 - 5070az 9.00 amepr30 - 4864az 9.00 amepr30 - 36100az 9.00 amepr30 - 24140az 26.00 amepr30 - 12250az 26.10 temperature graph - 40 - 20 0 20 40 60 80 100 100 80 60 40 20 0 free air convection 55 o c safe operating area ambient temperature o c 85
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 5 of 14 north america only efficiency vs. input voltage & output current (constant current load) ame o r3 0 - 5070az ame o r30 - 4864az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 6 of 14 north america only efficiency vs. input voltage & output current (constant current load) (c ontinued ) ame o r30 - 36100az ame o r 30- 24140az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 7 of 14 north america only ame o r 30- 12250az pfc value vs. output load curre nt (constant current mode) ame o r30 - 5070az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 8 of 14 north america only pfc value vs. output load current (constant current mode) (c ontinued ) ame o r30 - 4864az ame o r30 - 36100az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 9 of 14 north america only pfc value vs. output load current (constant current mode) (c ontinued ) ame o r 30- 24140az ame o r 30- 12250az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 10 of 14 north america only constant current vs. constant voltage mode ame o r30 - 5070az ame o r 30- 4864az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 11 of 14 north america only constant cur r ent vs. constant voltage mode (c ontinued ) ame o r30 - 36100az ame o r30 - 24140az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 12 of 14 north america only const ant current vs. constant voltage mode (c ontinued ) ame o r30 - 12250az dimming control (output current vs. radj) ame o r30 - 5070az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 13 of 14 north america only dimming control (output current vs. radj) (c ontinued ) ame o r30 - 4864az ame o r30 - 36100az
series am eor30 -az up to 2.5a | ac - dc / dc - dc led driver www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.f 14 of 14 north america only dimming cont rol (output current vs. radj) (c ontinued ) ame o r30 - 24140az ame o r30 - 12250az note: 1. datasheets are updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer control led by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for refe rence only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all in ternal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtecs standard terms of s ale available at www.aimtec.com. .

▲Up To Search▲

Price & Availability of AMEOR30C-4864AZ

	To Download AMEOR30C-4864AZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .